Panasonic Lumix DMC-LX5

- 133 -
Advanced (Recording pictures)
∫ White Balance Bracket
Bracket setting is performed based on the adjustment values for the white balance fine
adjustment, and 3 pictures with different colors are automatically recorded when the
shutter button is pressed once.
1 Press [DISPLAY] in step 2 of the “Finely adjusting the
White Balance” procedure, and press 3/4/2/1 to set the
bracket.
2 Press [MENU/SET].
Note
•
[ ] is displayed in the screen when the White Balance Bracket is set.
• Position of the bracket cannot be set exceeding the limit of the white balance fine adjustment
(limit value).
• When the white balance fine adjustment is performed after the setting of the bracket, pictures
will be taken with a bracket with the changed adjustment value as the center value.
• The White Balance Bracket setting is released when the power has been turned off (including
Sleep Mode).
• You will only hear the shutter sound once.
• White Balance Bracket cannot be set when the [QUALITY] is set to [ ], [ ], or [ ].
• [AUTO BRACKET], [ASPECT BRACKET], [MULTI FILM], or [BURST] will be canceled
when White Balance Bracket is set.
• White Balance Bracket does not work when recording motion pictures.
• White Balance Bracket cannot be set in [PIN HOLE] in My Color Mode.
∫ Auto White Balance
Depending on the conditions prevailing when pictures are taken, the pictures may take on
a reddish or bluish tinge. Furthermore, when a multiple number of light sources are being
used or there is nothing with a color close to white, Auto White Balance may not function
properly. In this case, set the White Balance to a mode other than [AWB].
1 Auto White Balance will work within this range
2 Blue sky
3 Cloudy sky (Rain)
4 Shade
5 Sunlight
6 White fluorescent light
7 Incandescent light bulb
8 Sunrise and sunset
9 Candlelight
KlKelvin Color Temperature
2/1: Horizontal (A to B)
3/4:Vertical (Gi to Mj)
1)
2)
3)
4)
5)
6)
7)
8)
9)