Others
- 202 -
Select [CONVERSION] on the [REC] Mode menu. (P28)
• Refer to P150 for [CONVERSION].
Press 3/4 to select [ ], and then press [MENU/SET] to set.
Note
•
Lens adapter (DMW-LA6; optional) is needed to use the conversion lens.
• When there is dirt (water, oil, and fingerprints, etc.) on the surface of the lens, the image may
be affected. Lightly wipe the surface of the lens with a soft, dry cloth before and after taking
pictures.
• When the wide conversion lens is removed, set [CONVERSION] to [OFF].
• When you take pictures at close range, the resolution of the periphery of the picture may
decrease slightly. This is not a malfunction.
• Refer to operating instructions of the wide conversion lens for details.
• Turn off the camera when removing the conversion lens.
• When the [CONVERSION] is set to [ ], the flash is fixed to [Œ].
• The supplied lens cap cannot be attached while the lens adaptor and the wide conversion lens
are attached.
To Next Page
Loading...
