Others
- 204 -
Attach a filter.
• Rotate the filter slowly and carefully.
B MC protector
C ND filter
D PL filter
• Ensure that the screw parts of the lens adaptor and the filter are properly tightened.
Note
•
Lens adapter (DMW-LA6; optional) is needed to use the filter.
• Do not attach multiple filters at the same time.
• If the filter is tightened too much, you may not be able to remove it. Do not tighten it too much.
• If the filter is dropped, it may be destroyed. Be careful not to drop it when attaching it to the
camera.
• Be careful not to get fingerprints, dirt, etc., on the filter when it is attached, otherwise the focus
may be adjusted to the lens, resulting in the subject being out of focus.
• Refer to the instructions for each filter for details.
• Turn off the camera when removing the filter.
• The supplied lens cap cannot be attached while the lens adaptor and the filter are attached.
To Next Page
Loading...
