Others
- 226 -
> Press [MENU/SET], select the [SETUP] menu icon [ ] and then select the [~] icon to set
the desired language. (P40)
• This is a highlight function showing the white saturated area. (P34)
• Is the [HIGHLIGHT] set to [ON]?
• In dark places, the AF Assist Lamp (P147) lights red to make it easier to focus on a subject.
• Is [AF ASSIST LAMP] on the [REC] Mode menu set to [ON]? (P147)
• The AF Assist Lamp does not turn on in bright places.
• The surface of the camera may become warm during use. This does not affect the performance
or quality of the camera.
• When the brightness changes due to zoom or camera movement etc., the lens may click and
the picture on the screen may drastically change. However, the picture is not affected. The
sound is caused by the automatic adjustment of the aperture. This is not a malfunction.
• If you do not use the camera for a long time, the clock may be reset.
> [PLEASE SET THE CLOCK] message will be displayed; please re-set the clock. When
taking pictures, it will not be possible to record the correct date without setting the clock.
(P25)
• It is possible that the subject may be warped slightly, or the borders get colored, depending on
the zoom magnification, due to the characteristics of the lens, but this is not a malfunction.
• When using the Extended Optical Zoom or the Intelligent Zoom, the zooming action will stop
temporarily. This is not a malfunction.
Others
An unreadable language was selected by mistake.
Part of the picture is flashing in black and white.
A red lamp sometimes turns on when the shutter button is pressed halfway.
The AF Assist Lamp does not turn on.
The camera becomes warm.
The lens clicks.
The clock is reset.
When pictures are taken using the zoom, they are slightly distorted and the
areas around the subject contain colors which are not actually present.
Zooming stops instantaneously.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
