- 35 -
Preparation
• Refer to P84 for details.
• Press the shutter button halfway or turn the camera off and on to cancel [SLEEP MODE].
• [SLEEP MODE] is set to [5MIN.] in the Intelligent Auto Mode.
• [SLEEP MODE] is fixed to [2MIN.] when [AUTO LCD OFF] is set to [15SEC.] or [30SEC.].
• The status indicator lights while the LCD monitor is turned off. Press any button to turn on the
LCD monitor again.
• [AUTO LCD OFF] does not work while operating menu or Playback Zoom.
• [SLEEP MODE] does not work in the following cases.
– When using the AC adaptor
– When connecting to a PC or a printer
– When recording or playing back motion pictures
– [MULTI EXPO.]
– During a slide show
– [AUTO DEMO]
• [AUTO LCD OFF] does not work in the following cases.
– When using the AC adaptor
– When connecting to a PC or a printer
– While the Self-timer is set
– When recording or playing back motion pictures
– [MULTI EXPO.]
– During a slide show
– While the menu screen is displayed
– [AUTO DEMO]
[MF ASSIST]
In Manual Focus, the assistance screen appears on the center of
the screen to facilitate focusing on the subject.
[OFF]
[MF1]: The center of the screen is enlarged.
[MF2]: The center of the screen is enlarged over the whole
screen.
q [ECONOMY]
You can conserve the battery life by setting these menus.
Also, it will turn off the LCD monitor automatically when not in use
to prevent discharge of the battery.
p [SLEEP MODE]:
The camera is automatically turned off if the camera has not been
used for the time selected on the setting.
[OFF]/[2MIN.]/[5MIN.]/[10MIN.]
[AUTO LCD OFF]:
The LCD monitor is automatically turned off if the camera has not
been used for the time selected on the setting.
[OFF]/[15SEC.]/[30SEC.]
To Next Page
Loading...
Need help?
General
Weight and Dimensions
