Panasonic LUMIX DMC-LZ8

Connecting to other equipment
Connecting to a PC
® AC adaptor (DMW-AC6PP: optional)
® DC coupler (DMW-DCC2: optional)
• Use batteries with sufficient battery
power or the AC adaptor
® and the
DC coupler
®.
• By connecting the camera to a computer,
you can upload your pictures, then
use the software
on the included CD-
ROM ([PHOTOfunSTUDIO-viewer-] for
Windows®)·to print or send your images
bye-mail.
•
If you use Windows 98/98SE, install
the USB
driver and then connect the
camera
to the computer.
• For details, refer to the operating
instructions (PDF file) of the software.
1 Turn on the camera and the PC.
2 Connect the camera
to a PC via
the USB
connection cable ©
(supplied).
• The screen to select [PictBridge (PTP)]
or [PC] is displayed.
• If [USB MODE]
in setup menu is set to
other than [SELECT
ON CONNECTION],
the screen
is not displayed (P23).
AV OUT -----®
~rn ~
DIGITAL
® :
@J
®
• Always use a genuine Panasonic AC
adaptor (DMW-AC6PP: optional) and
DC coupler (DMW-DCC2: optional).
• Make sure the camera
is off before
connecting or disconnecting the
AC
adaptor.
© USB connection cable (supplied)
• Connect the USB connection cable
with the [
~] mark facing the [~]
mark on the [DIGITAL] socket.
® This message appears during data
transfer.
CD Check the facing of the connector and
push straight in.
• Hold
CD and then insert or pull the USB
connection cable straight. Do not try
to force the connector in backwards or
sideways. This can damage this unit and
the equipment you are connecting.
3 Select [PC] using T and press
[MENU/SET].
[Windows]
The drive appears on the [My Computer]
folder.
• If it
is the first time you are connecting
the camera to a
PC, the required driver is
installed automatically so that the camera
can be recognized by the Windows Plug
and Play, then it appears on the [My
Computer] folder.
[Macintosh]
The drive is displayed on the screen.
•
The drive is displayed as [LUMIX] when you
connect the camera with no card inserted.
• The drive is displayed as [NO_NAME] or
[Untitled] when you connect the camera
with a card inserted.
100
VQT1L86