Connecting
to
other
equipment
• Folder composition
Folders appear as follows.
• Conditions under which a different
folder number
is
used
In
the following cases, the picture
is
not recorded
in
the same folder as the
previously recorded picture.
It
is
recorded
in
a folder with a new number.
• The folder containing the picture you
just shot had a file numbered 999
in
it
(example: P1000999.JPG).
• When the card just recorded to contains,
for example, a folder with the number
100 (100_PANA)
in
it and that card is
removed and replaced with a card that
has a folder with the number 100
in
it
recorded by a camera from a different
maker (100XXXXX, with XXXXX being
the name of the maker) and then a
picture is recorded.
• You start shooting again after using
[NO.RESET] in the setup menu. (It
is recorded to a new folder that has
a number following on from the one
previous. You can also reset the folder
number to 100 by using [NO.RESET]
immediately after formatting the card
when there are no folders or pictures on
the card.)
• Connection in the PTP mode
If the
as
is
"Windows XP", "Windows
Vista" or "Mac
as
X",
you can connect
in
PTP mode if you set the camera to
[PictBridge (PTP)] and press [MENU/SET]
after connecting the USB cable.
• You can only load pictures from the
camera and cannot write them on the
card or delete them.
However, you can connect
in
MTP mode
on Windows Vista, instead of PTP. Then,
you can format or delete the data on the
card.
• When there are 1000 or more pictures on
a card, the pictures may not
be
imported.
100
PANA
L.....J-
•
P1000001.JPG
l--..JL-...J
•
6)
P1000002.JPG
I
I
I
P1000999.JPG
101_PANA
• Motion picture playback on a
PC
Use "QuickTime" (for Windows 2000/XP/
Vista)
in
the supplied CD-ROM when you
play back motion pictures recorded on this
camera on your PC.
• Download [QuickTime6.5.2 for Windows]
from the following website and install it
on
your
PC
when you use Windows98/
98SE/Me.
http://www.apple.com/supportl
downloads/quicktime652forwindows.html
• The software is a standard Macintosh
feature.
999_PANA
Mise
• Folder number
• File number
6)
JPG : Pictures
MOV : Motion pictures
MISC: Folder containing files with following
settings
DPOF print
Favorite
• This unit stores up to 999 picture files
in
each folder. A new folder
is
created after
this maximum
is
reached.
• To reset file and folder numbers, use
[NO.RESET]
in
the setup menu. (P23)
101
To Next Page
Loading...
