Connecting to other equipment
• Do not use any other USB connection
cables except the supplied one.
• While [ACCESS] is being displayed,
do not disconnect the USB connection
cable.
• When using Windows PC, click Safety
Remove Hardware icon on the task trey
first to remove USB cable. When the
icon is not displayed, make sure the
connection screen is not displayed, and
turn the camera [OFF] to remove.
• When connecting the camera
to
a
Windows 2000
as
PC
with the USB
connection cable,
do
not
replace the
card while the camera and the
PC
are connected. The information on
the card may be damaged. Before
changing cards, make sure you
perform the necessary steps
to
safely
remove hardware (double-click the
icon in the
task
bar in Windows).
• When there are many pictures
on
the
built-in memory
or
the card, it may take
some time to transfer them.
• Motion image files
in
the built-in memory
or on a card in this unit may not play
properly on a computer, so upload them
to your computer for playback.
• If the remaining battery power becomes
low while the camera and the
PC
are
communicating, the status indicator blinks
and the alarm beeps.
In
this case, stop
the communication at once on the
PC.
• Pictures edited or rotated with a PC may
be displayed
in
black
in
playback mode,
multi playback and calendar.
• If a card is not inserted when the camera
is connected to the PC, you can edit or
access the picture data on the built-in
memory. If a card is inserted, you can
edit
or
access the picture data on it.
• You cannot switch between the built-in
memory and the card while the camera
is
connected to the PC. When you want to
switch between the built-in memory and
102
the card, disconnect the USB connection
cable, insert (or remove) the card and
then connect the USB connection cable
to the PC again.
• When connecting the camera to a Mac
OS
v1
0.2 or lower and using SDHC
Memory card to inport the picture data,
set the Write-Protect switch
on
the SDHC
Memory Card to [LOCK].
• Refer to the operating instructions of the
PC, too.
To Next Page
Loading...
