Advanced-Shooting
Press
[@]
to display the [REG] mode menu and select the item to set. (P19)
~
[SENSITIVITY]
Setting the light sensitivity
IPASMI
ISO sensitivity represents the sensitivity
of the image sensor to light. If you set the
ISO sensitivity higher, the camera becomes
more suitable for recording in dark places.
• When setting to [AUTO], the ISO
sensitivity
is
automatically adjusted to a
maximum of [150400] according to the
brightness. (When using the flash, the
adjustment range becomes a maximum
of [1501000].)
ISO sensitivity
100<
>1600
Use
in
bright
Not
places
Suitable
suitable
(e.g. outdoors)
Use
in
dark
Not
Suitable
places
suitable
Shutter speed
Slow Fast
Noise Less More
• The ISO sensitivity automatically changes
between [1501600] and [1506400]
in
[HIGH SENS.] mode.
•
To
avoid picture noise
we
recommend
reducing
the
ISO sensitivity, setting the
[NOISE REDUCTION] of [PICT.ADJ.]
to
high level
or
setting each of the items other
than [NOISE REDUCTION]
to
low level.
• ISO sensitivity cannot be set when the
Intelligent ISO
is
used.
•
In
manual exposure mode, [AUTO]
cannot be selectable.
70
[WHITE BALANCE]
• Adjusting the hue for a more
natural picture
IPAS
M9"R
seNsl
This function allows you to reproduce a
white color closer to the tone
in
real life
on the pictures recorded under sunlight,
halogen lighting, etc. in which the white
color may appear reddish or bluish. Select
a setting that matches the recording
conditions.
AWB
for auto setting
(auto white balance)
m(Daylight)
for recording
outdoors on a bright
day
~
(Cloudy)
for recording
outdoors on a cloudy
day
11(Shade)
for recording
in
shaded areas
outdoors on a bright
day
iii
(Halogen)
for recording under
halogen lighting
~
(White set)
for using the preset
white balance
!;&
(White set)
for using set mode
with a different white
balance setting
• The optimum white balance under
fluorescent lights depends on the type of
light, so use [AWB] or
[b.-A
SET].
VQT1L86
To Next Page
Loading...
