VQT1Z82 103
Playing motion pictures recorded in ‘AVCHD Lite’ on your computer
Use the ‘PHOTOfunSTUDIO’ software on the supplied CD-ROM.
Save the motion picture to your computer, and play it back.
Playing motion pictures recorded in Motion JPEG on your computer
Use the ‘QuickTime’ software on the supplied CD-ROM.
• Installed as standard on Macintosh
Save motion pictures to your computer before viewing.
Do not use any other USB connection cables except the supplied one.
Turn off power before inserting or removing memory cards.
If using Windows 98/98SE, install USB driver software when connecting for first time.
When the battery begins to run out during communication, the status indicator flashes
and a warning beep sounds. Cancel communication via your computer immediately
(recharge the battery before reconnecting).
Setting the ‘USB MODE’ (P.24) to ‘PC’ remove the need to make the setting each time
the camera is connected to the computer.
For more details, consult your computer operating manual.
Using the Multi Conversion Adaptor (sold separately)
The Multi Conversion Adaptor (DMW-MCA1, optional) enables connection to your
computer or printer and to a TV for picture playback with your camera connected to
the AC adaptor (DMW-AC5PP, optional) so that you do not have to worry about the
battery power level.
Connection example
Always use a genuine Panasonic AC adaptor (DMW-AC5PP: optional).
Do not use any other AV cables except the supplied one.
Do not use any other adaptors except a genuine Panasonic multi conversion
adaptor (DMW-MCA1; optional).
Check socket direction and insert straight in.
(Damage to socket shape can lead to faulty operation.)
Multi Conversion Adaptor
(sold separately)
USB connection cable
(supplied)
AC adaptor (sold separately)
• Do not connect and disconnect the camera while the power is set to ON.
Computer or printer
TV
AV cable (supplied)
To Next Page
Loading...
Need help?
General
