50 VQT1Z82
Taking pictures by automatically changing the
aspect ratio
‘MULTI ASPECT’
Mode:
In this mode, pressing the shutter button once automatically takes three pictures in each
of three aspect ratios: 4:3, 3:2, and 16:9. (The shutter sound is made only once.)
After MULTI ASPECT is set, is displayed on the left side of the screen.
Shutter speed, aperture, focus, ‘EXPOSURE’, ‘WHITE BALANCE’, and ‘SENSITIVITY’
settings will be constant for all three pictures.
MULTI ASPECT is disabled when the number of recordable pictures is two or less. It is
also canceled when the power is turned off.
When MULTI ASPECT is set, AUTO BRACKET and BURST are canceled.
MULTI ASPECT cannot be set in the ‘TRANSFORM’, ‘PANORAMA ASSIST’, ‘HIGH
SENS.’, ‘HI-SPEED BURST’, ‘FLASH BURST’, ‘STARRY SKY’, ‘PIN HOLE’, and ‘FILM
GRAIN’ scene modes.
Display ‘AUTO BRACKET’
Press twice to switch
‘EXPOSURE’ to
‘AUTO BRACKET’.
Display ‘MULTI ASPECT’
Each time ‘DISPLAY’ is
pressed, the displayed
indicator switches between
‘AUTO BRACKET’ and ‘MULTI
ASPECT’.
Select ‘ON’ and set.
display
Picture size combinations
10M 9.5M 9M
7M 6.5M 6M
5M 4.5M 4.5M
3M
3M 2.5M
(Example)
when
is set to 6.5M, the image
sizes and corresponding resolutions
are
with 7M, with 6.5M, and
with 6M.
If a smaller picture size is set, the
resolution is temporarily set to this
value.
‘MULTI ASPECT’ is not available in the DMC-ZS1.
To Next Page
Loading...
Need help?
General
