96 VQT1Z82
Using PLAYBACK menu
(Continued)
REC/PLAY switch: (Set mode dial to any except )
PRINT SET
Picture/picture no./date printing settings can be made for when printing with DPOF print-
compatible shops or printers. (Ask at shop to check compatibility)
For more information visit:
http://panasonic.jp/dc/dpof_110/white_e.htm
Set-up: Press ‘MENU/SET’ ‘ PLAYBACK menu’ Select ‘PRINT SET’
Select ‘SINGLE’ or ‘MULTI’
Select picture
SINGLE MULTI
Set number of pictures
(repeat steps and when using ‘MULTI’ (up to 999 pictures))
SINGLE MULTI
No. to print
Date print
set
No. to print
Date print set
• Date print setting/release Press display button.
• After confirmation, press
to return to the menu screen.
To release all Select ‘CANCEL’ in step and select ‘YES’.
When using PictBridge-compatible printers, check settings on actual printer as these
may take priority over camera settings.
To print from built-in memory at a shop, first copy pictures to card (P.98) before making
settings.
DPOF print settings may not be made to non-DCF (P.40) files.
Some DPOF information set by other equipment cannot be used. In such cases, delete
all of the DPOF information and then set it again with this camera.
Date printing settings cannot be made for pictures with a ‘TEXT STAMP’ applied. These
settings will also be canceled if a ‘TEXT STAMP’ is applied later.
Motion pictures recorded in ‘AVCHD Lite’ format cannot be set.
To Next Page
Loading...
Need help?
General
