VQT1Z82 25
See P.18 for the setting procedure in the SETUP menu.
TV ASPECT
Change the aspect ratio
when connected to a TV,
etc. (PLAYBACK mode
only).
/
• When set to , pictures will be displayed vertically long
on LCD monitor. (Operates when AV cable is connected.)
HDMI MODE
Set the output resolution
when connected to a
high-definition TV with
an HDMI mini cable (sold
separately). (P.108)
AUTO: The output resolution is automatically
determined based on information from the
connected TV.
1080i: Outputs 1080 effective scanning lines in
interlaced format.
720p: Outputs 720 effective scanning lines in
progressive format.
480p: Outputs 480 effective scanning lines in
progressive format.
Interlaced and Progressive Formats
In ‘i’ = interlaced format (interlaced scanning), half of the
effective scanning lines are displayed alternately every
1/60 second. In ‘p’ = progressive format (progressive
scanning), high-density video signals are sent
simultaneously for all effective scanning lines every 1/60
second.
The HDMI socket of this camera supports ‘1080i’ high
definition video output.
To enjoy progressive video or high definition video, a TV
compatible with these formats is required.
• Even if ‘1080i’ is set, the motion picture is output at 720p
during playback.
• If no video appears on the TV even though ‘AUTO’ is set,
try switching to ‘1080i’, ‘720p’, or ‘480p’ to adjust to a
video format that can be displayed on your TV. (See the
manual for your TV.)
• This is activated when an HDMI mini cable (sold
separately) is connected.
• For further details, see P.108.
Item Settings, notes
The ‘HDMI MODE’ menu item is not available in the DMC-ZS1.
To Next Page
Loading...
