VQT1Z82 67
Useful features for travel
Mode:
TRAVEL DATE (Record travel date and destination)
Record information as to what day and where pictures were taken by setting departure
dates and destinations.
Set-up: • Clock must be set in advance (P.17).
• Press ‘MENU/SET’ ‘
SETUP MENU’ Select ‘TRAVEL DATE’
The number of days elapsed is displayed for approx. 5 sec. when switching from playback
to recording mode or when power is turned on. (
displayed at bottom-right of screen)
When destination is set in ‘WORLD TIME’ (next page), days elapsed are calculated
based on local destination time.
If settings are made before departure date, number of days to departure are displayed
in orange with a minus sign (but not recorded).
When ‘TRAVEL DATE’ is displayed in white with a minus sign, the ‘HOME’ date is one
day in advance of the ‘DESTINATION’ date (this is recorded).
Text in ‘LOCATION’ can be edited after recording with ‘TITLE EDIT’ (P.89).
To print travel date or destination Use ‘TEXT STAMP’ (P.90), or print using supplied
CD-ROM (PHOTOfunSTUDIO).
Names in ‘BABY’ and ‘PET’ scene modes cannot be recorded when ‘LOCATION’ is set.
‘TRAVEL DATE’ can be recorded during motion picture recording (Motion JPEG only),
but ‘LOCATION’ cannot.
Select ‘TRAVEL SETUP’
Select ‘SET’
Set departure date
Set return date with
Exit without entering if you do not wish
to set a return date.
Select ‘LOCATION’
Select ‘SET’
Enter destination
• Text input method (P.89)
• Press ‘MENU/SET’ twice after inputting
text to complete.
To release
Setting is released automatically once
return date has passed. To release before
this date, select ‘OFF’ in step
, and
press ‘MENU/SET’ 3 times.
Recording only. (Cannot set.)
To Next Page
Loading...
Need help?
General
