VQT1Z82 71
See P.18 for menu setting procedure.
Slow-moving subject Fast-moving subject
ISO sensitivity 200
(Shutter speed 1/30)
ISO sensitivity 800
(Shutter speed 1/125)
Shutter speed and ISO sensitivity are displayed in the screen for a few seconds after
recording.
If interference becomes noticeable, we recommend reducing the setting, or selecting
‘NATURAL’ in the ‘COLOR MODE’ (P.77).
Blurring may occur depending on brightness, and size, position, and speed of
movement of the subject (e.g. if subject is too small, is on edge of picture, or starts
moving as soon as shutter button is pressed).
Scope of flash recording (P.44)
SENSITIVITY
Set ISO sensitivity (sensitivity to lighting) manually.
We recommend higher settings to take clear pictures in darker locations.
MODE: REC menu
Settings: AUTO / 80 / 100 / 200 / 400 / 800 / 1600
Setting guide
SENSITIVITY 80 1600
Location
(recommended)
Bright
(outdoors)
Dark
Shutter speed Slow Fast
Interference Low High
AUTO: Automatically set with range up to 400 (1000 when using flash) according to
brightness.
Scope of flash recording (P.44)
Cannot be set when ‘INTELLIGENT ISO’ is used ( is displayed)
If interference becomes noticeable, we recommend reducing the setting, or selecting
‘NATURAL’ in the ‘COLOR MODE’ (P.77).
To Next Page
Loading...
Need help?
General
