128 VQT1Z82
Specifications DMC-ZS3
Digital Camera: Information for your safety
Power Source
DC 5.1 V
Power Consumption
When recording: 1.3 W
When playing back: 0.6 W
Camera effective pixels
10,100,000 pixels
Image sensor
1/2.33” CCD, total pixel number 12,700,000 pixels
Primary color filter
Lens
Optical 12 x zoom
f=4.1 mm to 49.2 mm (35 mm film camera equivalent: 25 mm to 300 mm)/
F3.3 to F4.9
Digital zoom
Max.4 x
Extended optical zoom
Max. 21.4 x
Focus
Normal/AF Macro/Macro zoom
Face detection/AF tracking/11-area-focusing/
1-area-focusing (High speed)/1-area-focusing/Spot-focusing
Focus range
Normal/Motion picture
50 cm (1.64 feet) (Wide)/2 m (6.57 feet) (Tele) to
Macro/Intelligent Auto/
Clipboard
3 cm (0.1 feet) (Wide)/ 1 m (3.28 feet) (Tele) to
(2 m (6.57 feet) unless max.T)
Scene mode
There may be difference in above settings.
Shutter system
Electronic shutter + Mechanical shutter
Motion picture recording
AVCHD Lite
1280 x 720 pixels 60p recordings (Only when using an SD Memory Card)
CCD output is at 30fps
Approx. 17 Mbps/Approx. 13 Mbps/Approx. 9 Mbps (VBR), with stereo audio
Motion JPEG
1280 × 720 pixels / 848 x 480 pixels / 640×480 pixels / 320×240 pixels
( Only when using an SD Memory Card)
30 frames/second with stereo audio
Burst recording
Burst speed
2.3 pictures/second (Burst), Approx. 1.8 pictures/second (Unlimited)
Number of recordable
pictures
Max. 5 pictures (Standard), max. 3 pictures (Fine),
Depends on the remaining capacity of the built-in memory or the card
(Unlimited).
Hi-speed burst
Burst speed
Approx. 10 pictures/second (Speed priority)
Approx. 6 pictures/second (Image priority)
Number of recordable
pictures
Approx. 15 pictures (When using the built-in memory, immediately after
formatting)
Max. 100 pictures (When using a card, it may differ depending on the type
of card and the recording conditions)
ISO sensitivity
AUTO/80/100/200/400/800/1600
[HIGH SENS.] mode: 1600 - 6400
Shutter speed
8 to 1/2000 th
[STARRY SKY] mode: 15 seconds, 30 seconds, 60 seconds
White balance
AUTO/Daylight/Cloudy/Shade/Halogen/White set
Exposure (AE)
AUTO (Program AE)
Exposure compensation (1/3 EV Step, -2 EV to +2 EV)
Metering mode
Multiple/Center weighted/Spot
LCD monitor
3.0” low-temperature polycrystalline TFT LCD (Approx. 460,800 dots)
(field of view ratio about 100 %)
To Next Page
Loading...
