Other Software
Quicklime
(Windows XPNista)
You
can play back still pictures with audio and motion pictures (QuickTime Motion JPEG
format: .MOV extension) recorded on a digital camera.
• This is included as standard
in
Macintosh OSs.
• If you use Windows
98/98SE/Me/2000, download "QuickTime 6.5.2 for Windows" from
the following site and then install it.
http://www.apple.com/supportldownloads/quicktime652forwindows.html
• Please purchase Apple QuickTime Pro to edit movies created with the camera.
USB Driver
(Windows 98/98SE)
If
Windows 98/98SE is used, install the USB driver (software for operating the digital
camera through a PC) before connecting the digital camera to the PC.
• This installation
is
not required after the first connection.
Cautions for Use
• Please do not disconnect the USB connection cable when Software (supplied) is
in
use.
The software may not function correctly and damage the data being transmitted.
• When the access indication
of
the digital camera is lit or flashing, please
do
not
disconnect the USB connection cable. The software may not function correctly and
damage the data being transmitted. Please refer to the digital camera operating
instructions.
• When connecting to a PC, use an AC adaptor (optional) as the digital camera power
source. If the battery is disconnected during data transmission, there will be the risk
of
damage to the data being transmitted.
4
V0T1Z69
,
~
Installing supplied software
• Before inserting the CD-ROM, close all running applications.
(For Windows)
1 Insert the CD-ROM with the supplied
software.
The setup menu will start.
• If the setup menu does not automatically start, double-
click [My Computer] on the desktop, double-click
or
open
[VFFXXXX] (part No. XXXX varies by model), and double-
click [lnstMenu.exe].
2 Click on the [Recommended Installation].
• All necessary software will be installed.
• Only the software compatible with the
PC
in
use will be
displayed.
• Proceed with installation according to messages
appearing on the screen.
• If you do not need to install all software, click on the
required software
in
the Custom Install and install one by
one.
(For Macintosh)
1 Insert the CD-ROM with the supplied
software.
The folder is automatically displayed.
2 Double-click the ArcSoft folder to open it.
3 Double-click the icon
in
the application
folder.
• Installation starts.
5
V0T1Z69
To Next Page
Loading...
Need help?
General
