Focus / Zoom – Using AF
152
[SET]
1 Use the same procedure as MF (Record Using MF: 183) to check the
focus, then touch [Limit1] or [Limit2] to set the range of operation for AF.
•
[Limit1]/[Limit2] can be set from either.
2 Press to confirm the setting.
•
Press [DISP.] to return the operation range to the default setting.
•
This can be set when using an L-Mount lens with a focus ring.
•
It cannot be set if the focusing distance range selector switch of the lens has
been used to limit the operation range.
•
The setting values are reset when the lens is replaced.
•
When [Focus Limiter] is working, [ ]/[ ] is displayed on the screen.
•
When the following function is being used, [Focus Limiter] is not available:
–[AF+MF]
∞
10(m) 5 3 2 1.5 1 0.5 0.1
1 2
Limit1
Limit2
To Next Page
Loading...
