Drive / Shutter / Image Stabilizer – [Synchro Scan(Photo)]
251
[Synchro Scan(Photo)]
The flicker or horizontal stripes of the light source can be mitigated by
making fine adjustments to the shutter speed.
The shutter speed set in Synchro Scan is saved separately from the
shutter speed used for normal recording. In the Synchro Scan setting
screen, you can call up the current shutter speed for normal recording and
adjust it.
1
Set the recording mode to [S] or [M].
≥Set the mode dial. (Selecting the Recording Mode: 70)
2
Set [Synchro Scan(Photo)].
≥ [] [] [Synchro Scan(Photo)] [ON]
To Next Page
Loading...
