Camera Customization – [Setup] Menu
559
[Setup] menu ([Monitor / Display])
[Power Save Mode]
[Monitor Frame Rate]
: Default settings
[Sleep Mode]
[10MIN.] / [5MIN.] / [2MIN.] / [1MIN.] /
[OFF]
[Sleep Mode(Wi-Fi)] [ON] / [OFF]
[Auto Monitor Off] [5MIN.] / [2MIN.] / [1MIN.] / [OFF]
This is a function to automatically turn the camera to sleep (power save) status or
turn off the monitor if no operation is performed for a set time.
([Power Save Mode]: 48)
[30fps] / [60fps]
Sets the display speed for live view on the monitor when recording pictures.
[30fps]: Reduces the power consumption for a longer operating time.
[60fps]: Enables smooth display of movements.
•
When the following function is being used, [Monitor Frame Rate] is not available:
– HDMI output
To Next Page
Loading...
