Playing Back and Editing of Images – [Video Repair]
474
[Video Repair]
When the recording of a video could not be completed normally, a video file
that cannot be played back may be generated (extension “.mdt”).
You can repair the “.mdt” file with this function to make it playable.
•
Possible causes for the generation of “.mdt” files are:
– Power turns off during video recording (battery is removed, AC cable is unplugged,
power outage while using the AC adaptor, etc.)
– Card removed during video recording
– Card removed while writing to card after video recording
– When an unexpected freeze occurs during video recording/while writing to the
card
1
Select [Video Repair].
≥ [] [] [Video Repair]
•
Video files that can be repaired are filtered.
•
Videos that can be repaired are those videos recorded with the [Rec. File
Format] being [MOV].
Video recorded in [MP4(Lite)] or [MP4] cannot be repaired.
•
As repairs can take some time, supply with power during the operation. (Using
the Camera While Supplying It with Power (Supplying Power): 45)
To Next Page
Loading...
