Getting Started – Charging the Battery
42
Inserting a Battery into the Camera for Charging
(B) To the AC adaptor
1
Set the camera on/off switch to [OFF].
2
Insert the battery into the camera.
•
It is recommended to use the Panasonic AC Adaptor (DMW-AC11: optional)
or the supplied accessories of the Panasonic Battery Charger
(DMW-BTC15: optional) for charging.
•
You can charge with the camera body using a commercially available AC adaptor
and a USB connection cable.
*
Recommended specifications for the commercially available AC adaptor
–Supports 5 V/3 A (15 W) DC output
–USB Type-C terminal
*
Use a USB connection cable with 15 W output or better for charging.
•
You can also use an AC adaptor with 5 V/500 mA or better for charging.
However, charging time may be longer than with the recommended AC adaptor.
•
Operation is not guaranteed with all commercially available devices.