Video Settings – Time Code
374
Setting the Time Code
Sets the recording, display, and output of the time code.
1
Set [Rec. File Format] to [MOV].
≥ [] [] [Rec. File Format] [MOV]
2
Select [Time Code].
≥ [] [] [Time Code]
[Time Code Display]
Displays the time code on the recording screen/playback screen.
[Count Up]
[REC RUN]: Counts the time code only when recording videos.
[FREE RUN]: Counts the time code also when video recording is stopped and
when the camera is turned off.
•
When the following function is being used, [Count Up] is fixed to [REC RUN]:
– [S&Q] mode
To Next Page
Loading...
