Wi-Fi / Bluetooth – Using “LUMIX Sync”
631
[Location Logging]
The smartphone sends its location information to the camera via Bluetooth,
and the camera performs recording while writing the acquired location
information.
Getting started:
•
Enable the GPS function on the smartphone.
•
Connect the camera to a smartphone by Bluetooth. (Connecting to a Smartphone
(Bluetooth Connection): 606)
1
Enable [Location Logging] on the camera.
≥ [] [] [Bluetooth] [Location Logging] [ON]
•
The camera will enter a mode where location information can be recorded
and [ ] is displayed in the recording screen of the camera.
2
Record images with the camera.
•
Location information will be written to the recorded images.
To Next Page
Loading...
