Panasonic Lumix S9

Getting Started – Charging the Battery
45
Using the Camera While Supplying It with Power
(Supplying Power)
When the battery is inserted into the camera for charging and the camera
is turned on, you can record while the camera is being supplied with power.
•
It is recommended to use the Panasonic AC Adaptor (DMW-AC11: optional) or
the supplied accessories of the Panasonic Battery Charger (DMW-BTC15:
optional) for supplying power.
• You can supply power to the camera body using a commercially available AC
adaptor and USB connection cable.
*
Recommended specifications for the commercially available AC adaptor
–Supports 5 V/3 A (15 W) DC output
–USB Type-C terminal
*
Use a USB connection cable with 15 W output or better for supplying power.
• Operation is not guaranteed with all commercially available devices.
• [ ] is displayed in the screen while power is being supplied.
• You can also supply power by using a USB connection cable to connect the
camera and a USB device (PC, etc.).
• The battery cannot be charged while power is being supplied.
• Turn off the camera before connecting or disconnecting the AC adaptor.
• Remaining charge in the battery may decrease depending on usage conditions.
When the battery level is depleted, the camera will turn off.
• Depending on the power supply capabilities of the connected device, it may not
be possible to supply power.
• For information about the high temperature display (For information
about the high temperature display: 118)