Video Settings – Main Assist Functions
378
[SS/Gain Operation]
You can switch the units of shutter speed values and gain (sensitivity)
values.
[] [] Select [SS/Gain Operation]
[SEC/ISO]
Displays the shutter speed in seconds and the gain in ISO.
[ANGLE/ISO]
Displays the shutter speed in degrees and the gain in ISO.
•
The angle can be set in a range between 11° and 358°.
(when [Synchro Scan(Video)] is set to [OFF])
[SEC/dB]
Displays the shutter speed in seconds and the gain in dB.
•
0 dB corresponds to either of the following ISO sensitivity values.
– When [Dual Native Gain Setting] is set to [AUTO] or [LOW]: [100]
– When [Dual Native Gain Setting] is set to [HIGH]: [640]
To Next Page
Loading...
