Panasonic Lumix S9

Wi-Fi / Bluetooth – Using “LUMIX Sync”
630
4
Record with the camera.
• [ ] is displayed in the recording screen of the camera while a file is being
sent.
 To Stop the Automatic Transfer of Images
 []  []  [Bluetooth]  [Auto Transfer]  Select [OFF]
≥ A confirmation screen is displayed, asking you to terminate the Wi-Fi
connection.
•
If the [Bluetooth Function] and [Auto Transfer] settings of the camera are [ON],
the camera automatically connects to the smartphone via Wi-Fi and Bluetooth
when you turn on the camera.
Start up the “LUMIX Sync” on the smartphone to connect to the camera. Note
that if “LUMIX Lab” is running on the smartphone, automatic image transfer may
not work properly.
• Images are not transferred while the recording screen of the camera is displayed
on the smartphone in [Remote shooting].
• When [Auto Transfer] is set to [ON], [Wi-Fi Function] cannot be used.
• Automatic image transfer is interrupted while recording or playing back videos.
The transfer starts at the start of the file where it was interrupted when the
transmission restarts.
• If the camera is turned off during image transfer, and the file sending is
interrupted, then turn on the camera to restart the sending.
– If the storage status of unsent files changes, then sending of files may no
longer be possible.
– If there are many unsent files, then sending of all files may not be possible.
• Images recorded with the following function cannot be transferred automatically:
– Video recording