Panasonic Lumix S9

Camera Customization – [Setup] Menu
560
[Monitor Settings]
[Monitor Backlight]
[Level Gauge Adjust.]
[Brightness] / [Contrast] / [Saturation] / [Red Tint] / [Blue Tint]
This adjusts the brightness, coloring, and red or blue tints of the monitor.
1 Press 34 to select the setting item, and press 21 to adjust.
2 Press to confirm the setting.
[AUTO] / [−3] to [+3]
Adjusts monitor luminance.
[AUTO]: The brightness is adjusted automatically depending on how bright it is
around the camera.
• When either [AUTO] is set, or the adjusted value is set to positive side, the usage
period will shorten.
• When [Night Mode] is being used, [Monitor Backlight] is not available.
• If the temperature of the camera rises, the camera may automatically lower the
brightness of the monitor temporarily. The brightness is restored again when the
camera temperature goes down.
[Adjust.]
Hold the camera in a horizontal position, and press . The level gauge will be
adjusted.
[Level Gauge Value Reset]
Restores the default level gauge setting.