Focus / Zoom – Using AF
158
Initializing
Registered lens information and adjusted values are initialized.
1 Select [ALL] or [ADJUST BY LENS] and then press [Q].
2 Select [Yes] to initialize.
•
We recommend making the adjustments in the same environment that will be
used for recording.
•
We recommend using a tripod when adjusting.
•
You can register a maximum of 40 lenses in [ADJUST BY LENS]. When the
upper limit is exceeded, already registered lens information is overwritten.
•
When a teleconverter is used when adjusted with [ADJUST BY LENS], the
combination of the lens and teleconverter is registered.
•
The focus point for the wide-angle end and the telephoto end cannot be
individually adjusted in [ALL].
•
The registration numbers and lens names registered in [ADJUST BY LENS] are
entered automatically and cannot be changed.
•
Irrespective of the [ALL]/[ADJUST BY LENS] selection, all of the registered lens
information and adjusted values in [AF Micro Adjustment] are initialized.
To Next Page
Loading...
