Drive / Shutter / Image Stabilizer – Taking Burst Pictures
214
•
It may take a while to save burst pictures.
If you continue to take burst pictures while saving is in progress, the maximum
number of frames recordable will be reduced.
When taking burst pictures, we recommend using a high-speed card.
Notes on SH burst recording
•
There are limits on the shutter speed you can set during SH burst recording.
– [SH]/[SH PRE]: To a minimum of 1/30
•
The aperture will be fixed during burst recording.
•
The images recorded will be saved as a set of burst group pictures. (Group
Images: 461)
Notes on SH pre-burst recording
•
Pictures taken before the shutter button is pressed fully are not saved in the
following cases:
– When recording with the Touch Shutter
– When [Half-Press Shutter] in the [Custom] ([Focus/Shutter]) menu is set to
[ON]
•
When the ambient temperature is high or Pre-Burst recording is performed
continuously, even if you press the shutter button halfway, Pre-Burst may not
operate to protect the camera from overheating. Wait until the camera cools
down.
•
Even if you press the shutter button halfway, Pre-Burst may not operate when
there is insufficient free space on the card.
•
The refresh rate on the live view screen becomes 30 fps when you have selected
[SH PRE] and you press the shutter button halfway.
To Next Page
Loading...
