Drive / Shutter / Image Stabilizer – Bracket Recording
245
[More Settings] (Exposure Bracket)
[Step]
Sets the image count and exposure compensation step.
[3•1/3] (record 3 images in 1/3 EV steps) to [7•1] (record 7 images in 1 EV steps)
[Sequence]
Sets the order in which images are recorded.
[Single Shot Setting]
[]: Takes only one image each time the shutter button is pressed.
[]: Takes all of the set number of images when the shutter button is pressed once.
•
The [BKT] icon blinks until all of the set number of pictures is taken.
•
When you record images with Exposure Bracket after setting the exposure
compensation value, the images recorded are based on the selected exposure
compensation value.
To Next Page
Loading...
