Drive / Shutter / Image Stabilizer – Image Stabilizer
260
[Operation Mode]
Set the stabilization movement (blur) to match the recording method
(normal, panning).
[Normal]
Corrects vertical, horizontal, and rotational camera shake.
This function is suitable for normal recording.
[Panning (Auto)]
Automatically detects the panning direction, and corrects vertical and horizontal
camera shake.
This function is suitable for panning.
[Panning (Left/Right)]
Corrects vertical camera shake.
This is suitable for horizontal panning.
[Panning (Up/Down)]
Corrects horizontal camera shake.
This is suitable for vertical panning.
[OFF]
Turns the image stabilization function OFF.
•
Operation modes that can be used will differ depending on the used lenses and on
[Body(B.I.S.) / Lens(O.I.S.)] settings.
•
[Panning (Auto)] is not displayed when using other manufacturers’ lenses with an
image stabilization function with [Body(B.I.S.) / Lens(O.I.S.)] set to [ ]. Set to
either [Panning (Left/Right)] or [Panning (Up/Down)] to suit the panning direction.
•
When using lenses with an O.I.S. switch, the camera’s operation mode cannot be
set to [OFF]. Set the switch on the lens to [OFF].
•
When the following functions are being used, [Operation Mode] switches to [ ]
([Normal]):
– [ ] mode
– [S&Q] mode
– Video recording
To Next Page
Loading...
