Drive / Shutter / Image Stabilizer – Image Stabilizer
263
[Anamorphic (Video)]
You can switch to an image stabilizer that suits anamorphic recording.
Settings:
[ ]([2.0×])/[ ]([1.8×])/[ ]([1.5×])/[ ]([1.33×])/[ ]([1.30×])/
[OFF]
•
Make settings to suit the magnification of the anamorphic lens you are using.
•
While [Anamorphic (Video)] is functioning, the set magnification appears on the
image stabilizer icons on the recording screen, as shown by [ ] and [ ].
•
When [Boost I.S. (Video)] is set, [Boost I.S. (Video)] is prioritized.
•
When the following function is being used, [Anamorphic (Video)] is fixed to [OFF]:
– [ ] ([Body(B.I.S.) / Lens(O.I.S.)])
•
Image stabilizer functions on your lens may not work correctly. Turn off the image
stabilizer function on your lens if this is the case.
To Next Page
Loading...
