Metering / Exposure / ISO Sensitivity – Exposure Compensation
288
•
In [M] mode, you can compensate the exposure by setting the ISO sensitivity to
[AUTO].
•
When the exposure compensation value falls below or exceeds ±3 EV, the
brightness of the recording screen will no longer change.
Press the shutter button halfway or use AE Lock to reflect the value on the
recording screen.
•
The set exposure compensation value is stored even if you turn off the camera.
•
The standard value for standard exposure can be adjusted:
([Exposure Offset Adjust.]: 520)
•
You can set the exposure compensation value to be reset when the camera is
turned off:
([Exposure Comp. Reset]: 522)
•
Exposure Bracket can be set on the exposure compensation screen:
([Exposure Comp. Disp. Setting]: 532)
•
You can assign the function that matches the aperture value and shutter speed to
the standard exposure to an Fn button:
([One Push AE]: 493)
To Next Page
Loading...
