Panasonic Lumix S9

Metering / Exposure / ISO Sensitivity – ISO Sensitivity
294
 Setting Items (ISO Sensitivity)
[AUTO]
The ISO sensitivity is automatically adjusted according to the brightness.
• Taking picture: Maximum [6400]
*1
• Video recording: Maximum [6400]
*2
[100] to [51200]
The ISO sensitivity is fixed at the selected value.
• The available ISO sensitivity range changes according to the setting of [Dual Native
ISO Setting] in the [Photo]/[Video] ([Image Quality]) menu. ([Dual Native ISO
Setting]: 296)
• You can extend the ISO sensitivity range in between a lower limit of [50] and an
upper limit of [204800] by setting [Extended ISO] ([Extended ISO]: 519) to [ON] in
the [Custom] ([Image Quality]) menu.
*1 Default setting. The upper limit can be changed with [ISO Sensitivity (photo)].
*2 Default setting. The upper limit can be changed with [ISO Sensitivity (video)].
• When the following functions are being used, the ISO sensitivity that can be set is
restricted.
– High Resolution mode: Up to an upper limit of [3200]
– [Filter Settings]: Up to an upper limit of [6400]
– [Cinelike D2]/[Cinelike V2] ([Photo Style]): Down to a lower limit of [200]
(The lower limit changes to [100] when [Extended ISO] is set.)
– [Like709] ([Photo Style]): Down to a lower limit of [100]
– [V-Log] ([Photo Style]): Down to a lower limit of [640], up to an upper limit of
[51200]
(The lower limit changes to [320] when [Extended ISO] is set.)
– [Like2100(HLG)]/[Like2100(HLG) Full Range] ([Photo Style]): Down to a lower limit
of [400]
• When [Photo Style] is set to [REAL TIME LUT], the range of ISO sensitivity levels
you can use depends on the base Photo Style of the applied LUT file.