White Balance / Image Quality – [REAL TIME LUT]
327
2
Select the LUT.
≥Press 21 to select, and then press .
≥You can also select by rotating or .
≥The LUT file list is displayed when you press [DISP.].
•
You can apply the LUT file that was registered in the [LUT Library]. ([LUT
Library]: 328)
•
[Sample LUT1] is applied in the default setting.
•
[ ] is displayed on the recording screen when a LUT file has not been
applied.
•
To cancel Real Time LUT, press [Q].
Sample LUT1
Switch
Cancel Real Time LUT
ュリヴヱハ
Set
Q
To Next Page
Loading...
