Playing Back and Editing of Images – [RAW Processing]
472
*1 Can be set when a LUT file is applied with [LUT1] or [LUT2].
*2 Can be set when [Grain Effect] is one of [Low], [Standard], or [High].
Displaying a Comparison Screen
You can change a setting while checking the effect by displaying images
with the applied setting value side by side.
1 Press [DISP.] in the screen of Step
4
.
•
The image with the current setting (A) is displayed at the center.
•
Touching the image with the current setting enlarges it.
Touching [ ] returns to the original display.
•
A comparison screen cannot be displayed while [Noise Reduction] or
[Sharpness] is selected.
2 Rotate or to change the setting.
3 Press to confirm the setting.
To Next Page
Loading...
