Camera Customization – [Setup] Menu
564
[HDMI Connection]
[Output Resolution(Playback)]
[AUTO] / [C4K/60p] / [C4K/50p] / [C4K/
30p] / [C4K/25p] / [C4K/24p] / [4K/60p] /
[4K/50p] / [4K/30p] / [4K/25p] / [4K/24p] /
[1080/120p] / [1080/100p] / [1080p] /
[1080i] / [720p] / [576p] / [480p]
Sets the HDMI output resolution for playback.
[AUTO]: Outputs with a resolution suited to the connected external device. When
playing back pictures, output is at a maximum resolution of 8K.
•
The items you can select depend on the [System Frequency] setting.
•
If no image appears on the external device with [AUTO], switch to a setting other
than [AUTO] to set a format supported by your external device.
(Please also refer to the operating instructions for the external device.)
•
It may not be possible to play back video, depending on the external device
connected.
[LUT View Assist (HDMI)] [ON] / [OFF]
Images with LUT (Look-Up Table) file applied are output when you play back videos
recorded with [Photo Style] set to [V-Log].
•
This is linked with [LUT View Assist (HDMI)] in [Log View Assist] under the
[Custom] ([Monitor / Display (Video)]) menu. ([Log View Assist]: 416)
To Next Page
Loading...
