Wi-Fi / Bluetooth – Connecting to “LUMIX Lab”
594
End Bluetooth Connection
To terminate the Bluetooth connection, turn off the Bluetooth function of the
camera.
[] [] [Bluetooth] [Bluetooth Function] Select [OFF]
•
The paired smartphone is registered as a paired device.
•
Even if you set up pairing with more than one smartphone, you can only connect
to one smartphone at a time.
•
When pairing takes some time, canceling the pairing settings on both the
smartphone and camera and re-establishing the connection may result in the
camera being detected correctly.
•
During Bluetooth connection, [ ] is displayed in the recording screen.
When the Bluetooth function is enabled, but a connection is not established with
the smartphone, [ ] appears translucent.
•
Up to 16 smartphones can be registered.
If you try to register more than 16 smartphones, the registration information will
be deleted from the oldest first.
•
It is not possible to connect “LUMIX Lab” and “LUMIX Sync” to the camera at the
same time.
•
Even if you terminate the connection, the pairing information for it will not be
deleted.
To Next Page
Loading...
