Wi-Fi / Bluetooth – Connecting to “LUMIX Sync”
610
Connecting to a Paired Smartphone
Connect paired smartphones using the following procedure.
1 Enable the Bluetooth function of the camera.
•
[] [] [Bluetooth] [Bluetooth Function] [ON]
2 On the smartphone, start up “LUMIX Sync ”.
•
If a message is displayed indicating that the smartphone is searching for
cameras, close the message.
3 Select [ ].
4 Select [Bluetooth Setup].
5 Turn Bluetooth ON.
6 From [Registered camera(s)] items, select the camera’s device name.
•
Even if you set up pairing with more than one smartphone, you can only connect
to one smartphone at a time.
•
When pairing takes some time, canceling the pairing settings on both the
smartphone and camera and re-establishing the connection may result in the
camera being detected correctly.
LUMIX Sync
Bluetooth
XXXXXXXX
To Next Page
Loading...
