Wi-Fi / Bluetooth – Using “LUMIX Sync”
623
Operation Method During Remote Recording
Set either the camera or the smartphone as the priority control device to be
used during remote recording.
[] [] [Wi-Fi] [Wi-Fi Setup] Select [Priority of
Remote Device]
[Camera]
Operation is possible on both the camera and the smartphone.
•
The camera’s dial settings, etc. cannot be changed with the smartphone.
[Smartphone]
Operation is possible only on the smartphone.
•
The camera’s dial settings, etc. can be changed with the smartphone.
•
To end remote recording, press any of the buttons on the camera to turn on the
screen, and select [End].
•
The default setting is [Camera].
•
The setting of this function cannot be changed while the connection is active.
To Next Page
Loading...
