Wi-Fi / Bluetooth – Using “LUMIX Sync”
626
Shortening the Return Time from [Sleep Mode]
You can shorten the time it takes for the camera to return from [Sleep
Mode] when the [Shutter Remote Control] is used.
Getting started:
•
Connect the camera to a smartphone by Bluetooth. (Connecting to a Smartphone
(Bluetooth Connection): 606)
•
Set [Remote Wakeup] in [LUMIX Sync Settings] to [ON]. ([Remote Wakeup]: 633)
[] [] [Bluetooth] [LUMIX Sync Settings] Select
[Returning from Sleep Mode]
[Import / Remote Priority]
Shortens the time to return when using [Import images] or [Remote shooting].
[Remote Shutter Priority]
Shortens the time to return when using [Shutter Remote Control].
•
To use the [Shutter Remote Control] to cancel [Sleep Mode] on the camera, set
[Bluetooth] in the [Setup] ([IN/OUT]) menu as follows, then connect via Bluetooth:
– [Remote Wakeup] ([LUMIX Sync Settings]): [ON] ([Remote Wakeup]: 633)
– [Auto Transfer]: [OFF] ([Auto Transfer]: 629)
•
The camera cannot be turned on by using [Shutter Remote Control].
To Next Page
Loading...
