Panasonic Lumix S9

Materials – Troubleshooting
702
Striping or flicker may appear under lighting such as fluorescent
or LED lighting.
•
This is characteristic of CMOS sensors which serve as the camera’s pickup sensors.
This is not a malfunction.
• Lowering the shutter speed may reduce the effect of the horizontal stripes.
• If flicker or horizontal stripes are noticeable when recording video, this can be
mitigated by fixing the shutter speed.
Either set [Flicker Decrease (Video)] ([Flicker Decrease (Video)]: 377), or fix the
shutter speed with the [ ]/[S&Q] mode (Recording Modes Specifically for
Video (Creative Video/S&Q): 341).
• You can make finer adjustments to shutter speed by using [Synchro Scan(Photo)] or
[Synchro Scan(Video)]. ([Synchro Scan(Photo)]: 251, [Synchro Scan(Video)]: 425)
Stripes appear in high ISO sensitivity.
•
Stripes may appear in high ISO sensitivity or depending on the lens you use.
Decrease the ISO sensitivity. (ISO Sensitivity: 292)