Panasonic MFDLTA3BM - Page 104

No.SX-DSV03335
Cate
Pr.
Parameter
Defaul
t
value
Cate
Pr.
Parameter
Defaul
t
value
Cate
Pr.
Parameter
Defaul
t
value
Cate
Pr.
Parameter
Defaul
t
value
Cate
Pr.
Parameter
Defaul
t
value
3
0 No use
-
1 No use
-
2 No use
-
3 No use
-
4 For Manufacturer use
0
5 For Manufacturer use
0
6 No use
-
7 No use
-
8 No use
-
9 No use
-
10 No use
-
11 No use
-
12 Acceleration time setup
0
13 Deceleration time setup
0
14
Sigmoid acceleration/ deceleration
time setu
p
0
15 No use
-
16 No use
-
17 Selection of speed limit
2
18 No use
-
19 No use
-
20 No use
-
21 For Manufacturer use
0
22 For Manufacturer use
0
23
Feedback scale selection
0
24 For Manufacturer use
0
25 For Manufacturer use
1
26
Reversal of direction of feedback
scale
0
27
Feedback scale Z phase
disconnection detection disable *3
0
28 For Manufacturer use
1
29 For Manufacturer use
0
*1 When checking directly value of parameter-file with a text data etc., it does not show the decimal point. Ex) Pr6.24 Load change compensation filter ･･･ Value of Panaterm ： 0.53 / Value of parameter-file ： 53
* Parameter names in the table correspond to the DD motor (rotary type). For parameter names and setting values corresponding to linear motors, refer to the technical document.
4/11
PARAMETER MODEL MINAS-A6B(BL/BM) series