Panasonic MFDLTA3BM - Number of Ferrite Cores for EMC Certification Test

No. SX-DSV03335 - 78-
R2.0 Industrial Device Solution Business Unit, Panasonic Corporation
Number of ferrite cores for EMC certification test
Symbol
Location
Applicable Size of
servo driver
Option part number
Manufacturer's
part number
Number
NF1
Power
supply
able
(100 V) C
(200 V) C,D
DV0P1460
ZCAT3035-1330
No need
(100 V) A,B
(200 V) A,B,E
(400 V) D,E,F
1
(200 V) G,H
DV0P1460
ZCAT3035-1330
3
-
RJ8095
1
NF2
Motor
cable
(100 V) A,B,C
(200 V) A,B,C,D,E
(400 V) D,E,F
DV0P1460
ZCAT3035-1330
1
(200 V) F
2
(200V ) G,H
DV0P1460
ZCAT3035-1330
3
-
T400-61D
1
* 1 Power supply cables (L1, L2, L3 ) should be wound together for one circle.
Motor cables (U, V, W ) should be wound together for one circle. 1 circle (bypass 1 line)
* 2 Please wind the power supply cables (L1, L2, L3) for one circle separately.
Please wind the motor cables (U, V, W ) for one circle separately. 1 circle (bypass 1 line)
* 3 Power supply cables (L1, L2, L3) should be wound together for four circles.
Motor cables (U, V, W) should be wound together for Four circles.
If cables cannot be laid down by four circles, two separate ferrite coils should be used to circle two cables s separately.
* 4 Motor cables (U, V, W ) should be wound together and bypass two ferrite coils of parallel connection. 1 circle (bypass 1 line)