6 Work with files
System settings
In converted backup files, the “LP-400/V compatibility” check box (in “System settings” >
“Operation/information”) is selected.
If the “LP-400/V compatibility” check box is selected, the following settings are changed:
• The command mode is changed from standard command mode to LP-400/V command
mode. In this mode you can use the command format of the LP-400/LP-V series.
• If you create a new marking file, the object group number 1000 is automatically created
in the object list. Be aware that only the marking data located in the object group number
1000 can be controlled by the LP-400/LP-V series communication commands.
• The parameters under “File settings” > “Compatibility with former models” are available.
Related topics
Select LP-400/LP-V compatibility (page 259)
Convert a LP-400/LP-V backup file (page 79)
Convert a LP-400/LP-V file (.nlm) (page 80)
Position, rotate and mirror all objects in a file (page 223)
82 ME-NAVIS2-OP-1
To Next Page
Loading...
