15
Control Panel
Beep Sound:
When a pad is touched correctly, a beep will be heard.
If a pad is touched and no beep is heard, the unit did not or cannot accept the instruction. When operating, the oven will
beep twice between programmed stages. At the end of any complete program, the oven will beep 5 times.
Notes:
1. If there is no operation for 6 minutes after setting cooking program, the oven will automatically cancel the cooking
program. The display will return to clock or colon display.
2. The oven will enter stand-by mode after the last operation has completed. When in stand-by mode, the backlight of the
display will be reduced and the backlight of key will be turned off.
3. When in stand-by mode, it is necessary to open and close the oven door before operating the oven.
4. If no beep sound is heard, check “Beep ON/OFF” function feature (P19, 20).
Display Window
Step by step instructions scroll for
easy operation
Auto Cook
Pad (
page 31)
Sensor Reheat/Cook
Pad
(
page 32)
Steam
Pad (
page 24-25)
Popcorn
Pad (
page 28)
Convection
Pad (
page 23)
More/Less
Pad (
page 28)
Quick 30
Pad (
page 27)
Timer/Clock
Pad
(
page 18, 42)
Inverter Turbo Defrost
Pad
(
page 29)
Slider bar
(
page 19)
Touch or hold “+”/“-”,
swipe the slider bar to select the
cooking options.
Micro Power
Pad (
page 21)
Combination
Pad (
page 26)
Grill
Pad (
page 22)
Stop/Reset
Pad
Before cooking:
One touch clears all
your instructions.
During cooking:
One touch
temporarily stops the cooking
process. Another touch cancels all
your instructions, and time of day or
colon appears in the Display Window.
Start
Pad
After cooking program setting, one
touch allows oven to begin
functioning.
If door is opened or
Stop/Reset
Pad
is touched once during oven
operation,
Start
Pad must be touched
again to restart oven.
F0003BH71CP_OI_Eng_00_160121.indd sec15F0003BH71CP_OI_Eng_00_160121.indd sec15 2016/1/22 9:13:582016/1/22 9:13:58
To Next Page
Loading...
