Panasonic NN-CS896S - Cleaning Features; System Cleaning Program; Cavity Cleaning Program

41
Cleaning feature
23. Cavity cleaning
This feature is available when the cavity is built up with fat
or grease (20 minutes is needed).
Step 1.
Touch once
• Touch
Auto Cook
.
Step 2.
Swipe
• Select the desired feature using
the slider bar.
Step 3.
Touch once.
• Touch
Auto Cook
to verify the
feature.
Step 4.
• Touch
Start
.

Time will count down without
oven operating.
NOTES:
1. Full the tank with water before using.
2. After cleaning, open the door and wipe with a damp
cloth.
22. System cleaning
The fi rst stage of this program cleans the system with a
citric acid solution. The second stage runs water through
the system to rinse the pipes.
Step 1.
• Make a solution of 14
g
(0.5 oz.)
citric acid and 175 ml (
¾
cup) of
water, add the solution to the water
tank. Ensure drip tray is empty.
Step 2.
Touch once.
• Touch
Auto Cook
.
Step 3.
Swipe
• Select the desired feature using
the slider bar.
Step 4.
Touch once.
• Touch
Auto Cook
to verify the
feature.
Step 5.
Touch once
• Touch
Start
.

The time appears in the display
window and begins to count
down. The program will run for
approx. 29 minutes.
Step 6.
• After the program has paused,
empty the drip tray and fi ll the
steam tank with water (to max
level).
Step 7.
• Touch
Start
.

The program will run for approx.
1 minute. Empty the drip tray
after the program has fi nished.
NOTES:
1. When
appears in the display, run the ‘system
cleaning’ program.
2. If the system cleaning program is not used regularly, the
pipe will get blocked and the steaming performance will
be less effective.
3. Do not remove the drip tray during the drain program.
If the drip tray is removed during the program, U12 is
displayed and the program will stop.
4. Empty the drip tray and rinse with running tap water
after the program has fi nished.
(continued)
F0003BH71CP_OI_Eng_00_160121.indd sec41F0003BH71CP_OI_Eng_00_160121.indd sec41 2016/1/22 9:14:002016/1/22 9:14:00