27
3-Stage
Cooking
This feature allows you to program 2-3 Stages of cooking
continuously.
Example: Continually set 600 W for 5 minutes, Grill 2
for 3 minutes and Combination 1 for
5 minutes.
Step 1.
Touch 3 times
• Touch
Micro Power
until the
desired power level appears in the
display window.
Step 2.
Swipe
• Set cooking time by touching “+”/
“-” or swipe the slider bar to
5 minutes.
Step 3.
Touch twice
• Touch
Grill
until the desired power
level appears in the display
window.
Step 4.
Swipe
• Set cooking time by touching “+”/
“-” or swipe the slider bar to
3 minutes.
Step 5.
Touch once
• Touch
Combination
until the
desired power level appears in the
display window.
Step 6.
Swipe
• Set cooking time by touching “+”/
“-” or swipe the slider bar to
5 minutes.
Step 7.
• Touch
Start
.
Cooking will start. The time in the
display window will count down.
NOTES:
1. The maximum number of stages for cooking is 3.
2. When using 1000 W for the fi rst stage, you may skip
step 1.
3. Fill the water tank before using Steam feature.
4. When operating, two beeps will sound between each
stage.
5. This feature is only available for Microwave, Grill (without
preheating), Combination, Timer, Convection (without
preheating), Steam and 300 W + Steam feature.
6. Combination 4-6, Steam and 300 W + Steam feature
can not be used over 30 minutes in this feature.
7. Auto program (such as popcorn, inverter turbo defrost,
auto cook and sensor cook feature) can't be use in
3-stage cooking.
Quick 30
Feature
This feature allows you to set or add cooking time in
30 seconds increments up to 5 minutes.
To Set Time using Quick 30:
Example: To cook at 600 W for 1 minute 30 seconds
Step 1.
Touch 3 times
• Enter the desired
Micro Power
(see page 21 for directions).
Step 2.
Touch 3 times
• Touch
Quick 30
until the desired
cooking time (up to 5 minutes)
appears in the display window.
Step 3.
• Touch
Start
.
Cooking begins and the time will
count down. At the end of
cooking, 5 beeps sound.
NOTES:
1. When using 1000 W for the fi rst stage, you may skip
step 1.
2. This feature is only available for Microwave, Grill (without
preheating), Combination, Timer, Convection (without
preheating), Steam and 300 W + Steam feature.
3. Auto program (such as popcorn, inverter turbo defrost,
auto cook and sensor cook feature) can't be use in
Quick 30
feature.
4. After setting the time by
Quick 30
Pad, you cannot use
Slider bar.
To Add Time using Quick 30:
Example: Add 3 minutes, when using grill feature.
Touch 6 times
• During manual cooking, touch
Quick 30
until the desired cooking
time (up to 5 minutes) appears in
the display window.
NOTES:
1. This feature is only available for Microwave, Grill,
Combination, Timer, Convection, Steam and
300 W + Steam feature.
2. Auto program (such as popcorn, inverter turbo defrost,
auto cook and sensor cook feature) can't be use in
Quick 30
feature.
F0003BH71CP_OI_Eng_00_160121.indd sec27F0003BH71CP_OI_Eng_00_160121.indd sec27 2016/1/22 9:13:592016/1/22 9:13:59
To Next Page
Loading...
