Panasonic NV-DS15EN - Recording

RGC
RECORD
^.-^AUSE
FNGLISH
PROGRAMME AE
Recording
After setting the [OFF/ON] Switch to [ON] to turn the Movie
Camera on and sotting the Mode Selector Switch to [AUTO]
O* you can start recording simply by pressing the Recording
Stert/Stop Button. In this case, the Movie Camera adjusts the
focus and white balance fully automatically.
•Depending on the light source and recording situation,
correct automatic focusing and white balance adjustment
may not be possible. In such cases, adjust them manually.
Foais: 106): White Balance: 100,102,104)
1 Set the [OFF/ON] Switch to [ONJ.
The [CAMERA] Lamp lights. ^
2 Press the Recording Start/Stop Button.
•Recording starts.
•The [RECORD] Indication appears briefly and then
changes to [REC]. 0
To pause recording:
Press the Recording Start/Stop Button again.
TTje [PAUSE] Indication appears. 0
To finish recording:
Set the [OFF/ON] Switch to [OFF],
•Be sure to remove the Lens Cap before setting the [OFF/
ON] Switch to [ON]. If the Lens Cap is attached to the Lens
when you set the [OFF/ON] Switch to [ON], the automatic
white balance adjustment 168) may not be precise.
•If you leave the Movie Camera In the Recording Pause
Mode for more than 6 minutes, it automatically switches
off to protect the tape and to conserve battery power. To
resume recording from this condition, set the [OFF/ON]
Switch to [OFF] end then to [ON] again.
Recording Lamp (Tally Lamp)
The Recording Lamp lights 0 during recording to let the
people In front of the Movie Camera know that recording is
being performed.
If you set [REC LAMP] on the [OTHER FUNCTIONS]
Sub-Menu to [OFF], the Recording Lamp does not light.
- 44 -